Siding Installation and Replacement

Our Services

Siding Installation and Replacement in Austin, TX

Fiber cement and full home siding replacement from a family owned siding contractor serving Austin and Central Texas.

Your Siding Takes Everything the Roof Does Not

Your roof handles the rain. Your siding handles everything else. Three hundred days of UV, triple digit heat radiating off the walls, hail every spring, and humidity working its way behind panels through failed caulk and aging seams.

Cornerstone is a family owned siding company in Austin, and we handle installation, replacement, and repair across Central Texas. Fiber cement, board and batten, engineered wood, and the trim and paint work that finishes the job properly.

Most of what we install is fiber cement, and that is not a coincidence. In this climate it outperforms almost everything else, and we would rather put on a product that still looks right in fifteen years than one that saves you money today and costs you twice.

If your siding is faded, cracked, cupping, or soft to the touch in places, it is worth having someone actually look at it. Siding failures let water in, and water gets expensive once it reaches the sheathing behind.

Service Details

Our Siding Services

Our siding services cover tear-off, substrate repair, installation, trim, and paint. As siding installers, most of our projects pull from these:

Full Home Siding Replacement

Complete tear-off of the old material, inspection and repair of the sheathing underneath, new weather resistant barrier, and new siding installed with proper flashing and trim. This is the job that changes how your whole house looks and stops water problems at the same time.

Partial and Section Replacement

Not every project is the whole house. If one elevation took hail damage or has rot along the bottom, we will replace that section and match the rest.

James Hardie Fiber Cement Siding

Our most recommended material for Austin homes, in HardiePlank lap siding, HardiePanel vertical siding, and HardieShingle profiles. It does not warp, rot, burn, or attract termites, and it holds paint far longer than wood in our heat.

Board and Batten Siding

One of the most requested looks in Austin right now, and popular throughout Georgetown, Dripping Springs, and Leander. Vertical panels with battens over the seams for that modern farmhouse profile. It takes more layout planning than lap siding, which is worth knowing when comparing quotes.

LP SmartSide Engineered Wood

An engineered wood option with a real wood grain look, lighter than fiber cement and easier to work on complex elevations. A solid choice when the architecture calls for wood character.

Vinyl Siding

The budget conscious option, and it has improved considerably. Worth knowing that lower grade vinyl can warp or fade faster under sustained Texas heat, so material quality matters more here than in milder climates.

Siding Repair

Damaged boards, failed seams, and sections that need replacing without redoing the whole house. Matching existing siding is doable and we will be upfront about how close a match we expect to get.

Wood Rot and Trim Repair

Rotted trim, fascia, corner boards, and window casing replaced before the damage spreads into the structure. This is the single most common exterior repair we get called about.

Stucco Repair and Refinishing

Cracks, patches, and refinishing on stucco homes, matched to the existing texture. Common around window and door openings after window replacement.

Sheathing and Substrate Repair

The part nobody sees. When the old siding comes off, we find out what the previous siding was hiding. Damaged OSB or plywood gets replaced before anything new goes up.

Weather Barrier and Flashing

House wrap, kick-out flashing at roof to wall intersections, and flashing at every window and door. This is water management, and it matters more than the siding itself.

Soffit, Fascia, and Trim

The exterior details that finish the job, protect roof edges, and let your attic breathe.

Exterior Painting

Primer and finish coats with sealed cut edges and penetrations. Our painting crew handles this as part of the siding scope rather than leaving it as a separate project you have to arrange.

Storm and Hail Damage

After a Central Texas hailstorm we inspect the siding along with the roof, document what we find with photographs, and tell you honestly what took real damage.

Siding Costs in Austin

Siding is priced by square, which is one hundred square feet of wall surface, but two houses with identical square footage can price very differently. What yours costs comes down to:

  • How much wall surface you are covering
  • Material choice, with vinyl at the accessible end, engineered wood in the middle, and fiber cement higher
  • Profile selected, since board and batten and panel systems need more layout planning than standard lap siding
  • How much trim work is involved, including corners, windows, doors, and architectural detail
  • Tear-off conditions, including how many layers come off and what shape the sheathing is in underneath
  • Substrate repair, which cannot be fully assessed until the old siding is off
  • Number of stories and access, since two story elevations take more labor and equipment
  • Painting, including primer and finish coats
  • Installation standard, because preferred standard Hardie installation takes more labor than the allowed minimum

 

Timeline depends on size and complexity. Full home siding replacement runs longer than most exterior projects because tear-off, repair, installation, trim, and paint are sequential steps. Weather moves the schedule, since we are not opening up walls with storms in the forecast.

We would rather walk the actual exterior than guess. As a siding company, we will inspect what you have, tell you what the scope needs to include and why, and give you a clear number before anything starts. No hidden fees, and nothing quietly left off the list.

Why Austin Homeowners Choose Cornerstone

We are Joe and Julie Davila, and Cornerstone is our family business. Joe was born and raised in Austin and runs the construction side, on site and hands on. Julie helps with profile selection, color, and how the siding will read against your roof, trim, and stone.

Every project is managed by our in house team from planning through completion. Whether it is one elevation or the whole house, you will always have one point of contact.

Complete scope, stated clearly

Licensed contractor, fully insured

We tear off rather than cover up

Water management done right

Painting included

Local and family owned

Doing more than siding? We handle it inside whole home remodeling and alongside roofing, windows, and exterior work, and we take on interior projects too.

Our Process

Our Siding Installation Process

We keep the process simple on purpose. No runaround, no mystery.

Step 1

Send us your project

Tell us what is going on with your siding. Free, takes a few minutes.


Step 2

Exterior walkthrough

We check your current siding, flashing, trim, and moisture barriers, and photograph what we find.

Step 3

Selections

Fiber cement, engineered wood, or vinyl, plus profile, exposure width, and color.

Step 4

Trim and pain

Corners, trim, fascia, caulking, then primer and finish coats.



Living in the House While We Work

You stay in your home throughout, and your routine barely changes apart from noise and activity outside.

There will be crews, ladders or scaffolding, and equipment around the house. We protect landscaping, cover windows and doors during tear-off, and keep the site organized. Debris is cleaned up daily and we run magnetic sweeps for fasteners so nothing ends up in a tire or a paw.

Tear-off days are the loudest and dustiest, and we will tell you which ones those are. You may want to keep windows closed on those days and move vehicles away from the work area.

Siding Projects in Austin

Take a look at the siding we have installed and replaced for homeowners around Austin and Central Texas.

Our Service Areas

Siding Service Areas

As a local siding company, our installers take on projects across a wide stretch of Central Texas, in Travis County and Williamson County alike. If you are a little outside the Austin city limits, chances are we have still got you covered.

Austin

Round Rock

Cedar Park

Georgetown

Pflugerville

Leander

Kyle

Buda

Lakeway

Liberty Hill

Hutto

surrounding Central Texas communities

FAQs

Frequently Asked Questions About Siding in Austin

Get answers to common questions about remodeling costs, timelines, estimates, our process, and the services we provide for homeowners throughout Austin and Central Texas.

What is the best siding for Texas heat?

Fiber cement, for most Austin homes. It resists warping, UV fade, moisture, and termites, it is fire resistant, and it holds paint far longer than wood in our climate. James Hardie is the brand with the longest track record in Texas conditions, and their HZ10 formulation is built specifically for humid, high UV regions like Central Texas.

It is priced by square, and the range is wide. Material, profile, trim volume, tear-off conditions, substrate repair, number of stories, and whether painting is included all move the number substantially. Two homes with the same square footage can price very differently. We walk the exterior and give you a scoped quote rather than a guess.

In this climate, usually yes. Vinyl costs less upfront and modern grades have improved, but cheaper vinyl can warp and fade under sustained Texas heat. Over a ten to fifteen year window, fiber cement typically comes out ahead on maintenance, appearance, and durability. If budget is the deciding factor, we will tell you honestly whether a quality vinyl makes sense for your situation.

Allowed is the minimum standard that keeps the manufacturer warranty technically intact. Preferred is what Hardie recommends for the system to actually perform, with tighter details on fastener depth, grade clearance, sealed cut edges, back-priming, and joint treatment. Preferred takes more labor and costs more. It is also the difference between paint holding for fifteen years and peeling in four. It is a fair question to ask any siding contractor quoting your job.

Technically yes, and we generally advise against it. Covering old siding traps moisture, creates an uneven surface, and can void manufacturer warranties. Tearing off costs more and lets us see and repair the sheathing underneath, which is what protects the investment.

Yes. A complete fiber cement installation includes primer and finish coats with sealed cut edges and penetrations. If a quote you are comparing does not mention painting, ask, because it is a meaningful part of the cost and a common thing to leave off a cheaper number.

Vertical panels with narrow strips, called battens, covering the seams. It creates the modern farmhouse look that has become very popular around Austin, Georgetown, Dripping Springs, and Leander. It requires more layout planning than horizontal lap siding, so installation typically costs a bit more.

Longer than most exterior projects, because tear-off, substrate repair, weather barrier, installation, trim, and painting happen in sequence. Size, number of stories, and complexity all factor in, and weather can move the schedule. We give you a realistic timeline before we start.

Repair makes sense when the damage is contained to one area and the rest of the siding is sound. Replacement makes sense when there is widespread cracking, warping, or rot, when moisture has gotten behind the material in multiple places, or when the siding is simply at the end of its life. We will show you what we are seeing and give you an honest read.

Often, yes, particularly on a single elevation. Exact matching gets harder with older siding that has weathered and faded over the years, and we will be upfront about how close we expect to get before you commit rather than after.

It depends on scope. Straightforward siding replacement often does not, while structural work or changes to openings usually does. We will tell you what your project requires and handle the permitting if it is needed.

Two kinds. The manufacturer warranty covers the product itself and can be substantial on fiber cement, though it is tied to installation compliance. The workmanship warranty covers the installation. We go over both with you before you commit.

We do. Every estimate is free with no obligation, and if we do not need to walk the exterior first, you can often expect one within 24 hours.

Yes. Cornerstone Home Renovations is a licensed and insured siding contractor, so your home and your investment are protected.

Get started now

Ready for New Siding?

Tell us what is going on with your exterior. We will walk the house, show you what we find, and give you a scoped quote with nothing quietly left off the list.

Get in touch

Send and Receive Estimates, Fast

Got a project idea? If we don’t need to visit your home, expect an estimate within 24 hours. If we do need to come out, the visit is 100% free and usually scheduled within 3 to 5 business days. No pressure, no fees, no strings.
What can we do for you?